WUXI HENGRUIYANG INTERNATIONAL CO., LTD
WUXI HENGRUIYANG INTERNATIONAL CO., LTD
Add to Cart
| | Equipment dimensions | 4000mm*450mm*1200mm |
| weight | 1.5T | |
| Host big frame | steel welding | |
| Forming axial | φ50 | |
| Forming axial material | 45# ,steel welding | |
| Made board | 14mm | |
| Molding pressure roller material | 45# ,steel welding | |
| Drive | By gear | |
| Chain specification | 0.6 inch | |
| Equipment total power | 3+3kw | |
| Working speed | 0-10m/min | |
| Rolling material thickness | 0.3-0.8mm | |
| The rolling electric plating thickness | 0.05mm | |
| Cutting knife material | Gr12 |
The Chart of Process Flow:
manual uncoiler - roll forming machine - computer control system - hydraulic control system - cutting system - output table
Components and Technical Specification
1. Manual Uncoiler
Usage:It is used to support the steel coil and uncoil it in a turnable way. The steel coil is uncoiled by hand. Loading capacity:5T
Inner diameter: 500-508mm
2. Feeding Table
Put the raw material(steel plate) through the beach to manufacture and process, it can guarantee that the products are neat, parallel and everything is uniformity. Please refer to the equipment regulation to know the function of locate angle iron.
3. Hydraulic System
Power:4kw,Hydraulic oil: 40#
hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job.
4. Computer Control Cabinet
The target piece`s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use.
PLC:EURA
5. Cutting System:
It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products.
Material of blades: Cr12,quenching treatment
6. Output Table
It adopts welded steel and supported roller to transmit the products,which is used to collect the finished products.